ODOS Battery Monitoring Sensor

A CAN-based sensor that monitors pressure, temperature, VOCs, hydrogen, humidity, dew point, and acceleration. Configurable plugin in ODOS dashboard to be added to any ODOS data logger unit, low-power mode, and an automotive-grade Molex connector. Compact, lightweight, and tested to ISO standards for reliable integration in battery systems.

Pressure Sensor
Range 0.3 to 1.2 Bar
Resolution 0.0001 Bar
Accuracy 0.0005 Bar
Max Update Rate 50 Hz
Air Temperature
Range -40 to 125 °C
Resolution 1 °C
Accuracy +-1 (+-2 at 24VDC)
Max Update Rate 5 Hz
VOC's
Range 0 to 65535 Raw / 0 to 6553.5 ppm
Accuracy (Worse Case) 15 %
Max Update Rate 1 t(63) <1s) Hz
Hydrogen *1
Range 0 to 20% Vol. concentration
Resolution 0.002 %
Accuracy 0.4 vol% + 10% m.v.
Max Update Rate 1 t(63) <1s) Hz
Absolute Humidity
Range 0 - 35000 mg/m3
Resolution 70 mg/m3
Accuracy (Worse Case) 5 % FSS
Max Update Rate 5 Hz
Dew Point
Range 0 - 100 °C
Resolution 0.5 °C
Accuracy (Worse Case) +/3°C
Max Update Rate 5 Hz
Relative Humidity
Range 0 - 100 %
Resolution 0.5 %
Accuracy (Worse Case) 3 %
Max Update Rate 5 Hz
Accelerometer *1
Range - 24 to + 24 g
Resolution 0.01 g
Accuracy (Worse Case) 0.1 g
Max Update Rate 200 Hz
*1 Optional extra. Note: Air Temperature accuracy is dependent on installation, heat from the sensor itself can affect this. % of meas. value, sensor drift is 1.3% of measured value per year of operation, 90% of the sensors will be within the typical accuracy tolerance, stated accuracy is valid up to 100ppm. Humidity accuracy valid from 0 to 80 deg C IC temperature and 5 to 95% RH